Garmin MapSource User Manual page 8

I M S > U
NSTALLING AP OURCE
Select View my installed unlock codes.
3. The UnlockWizard displays a list of all of the
installed MapSource products.
To view the Unlock Code for a product, highlight
the product and then click Properties.
To delete an Unlock Code for a product,
highlight the product and click Delete.
To back up your Unlock Code:
1. In MapSource, click Utilities > Unlock Maps.
Then click Next.
2. Click Backup my unlock codes to a file. Then
click Next.
3. Browse to the folder where you want to store
your Unlock Codes.
4
M
NLOCKING APS
NOTE: Garmin recommends that you save the
back up file to a separate location other than the
MapSource folder.
4. Enter a file name for your Unlock Codes and
click Save.
5. The UnlockWizard saves all of your Unlock
Codes into that file for future use. You can now
close the UnlockWizard.
To restore your (saved) Unlock Codes:
1. In MapSource, click Utilities > Unlock Maps.
Then click Next.
2. Click Retrieve and reinstall all my Garmin
unlock codes. Then click Next.
3. Select Retrieve my codes from a file on my
PC.
4. Browse for the file where you saved your
Unlock Code and click Open.
5. Your codes should now be restored to
MapSource. Select Yes to return to the
UnlockWizard Options menu or select No, I am
done to exit the UnlockWizard.
MapSource User's Manual