Garmin MapSource User Manual page 15

Selected map regions appear shaded in pink.
BlueChart map regions appear outlined in pink.
®
4. To deselect a map region, click a shaded pink
area on the Graphic Map. To deselect several
map regions, press and hold the Ctrl key while
you click and drag across the map regions you
want to deselect.
The map regions you select are called a "map set"
and are listed in the Maps tab. Click the Maps tab to
view the names and sizes of each map region you have
selected.
Check the amount of memory your GPS unit has to
store map data. Then check the Maps tab to see how
much memory your map set requires. If the map set is
too big, deselect some map regions.
MapSource User's Manual
U M S > L
SING AP OURCE OADING
Names of map
regions.
Memory
needed to store
this map set.
Click to rename
map set.
NOTE: If your GPS unit supports auto-routing,
select the Include route calculation data check
box (located at the bottom of the Maps tab).
You can create a route in MapSource and then select
all of the map regions surrounding that route. You can
also select maps around waypoints or tracks. For more
information about creating routes, see
M Y G GPS U
APS TO OUR ARMIN
Maps Tab
page 20.
NIT
11