Control Instructions - Champion HBT400 User Manual

Control Instructions

Function
Power on
EN
Power off
Pairing
Answer a call
Reject a call
End a call
Redial the last
number
Cancel the function of
Redial the last
number
Sound transfer
(between headphone
and phone)
Play
Pause
Previous song
Next song
Vol +
Vol -
LED Indicator
When charging
When fully charged
Standby
Incoming call
Disconnect
On the call
Low battery alarm
5
Operations
When headphone turn off, long
press "power" button around 2
sec
When headphone turn on, long
press "power" button around 4
sec
Long press "power" button
around 4 sec
Short press "Power" button
Long press "Power" button for
2 sec
Short press "Power" button
Double press "Power" button
Short press "Power" button
Long press "Power" button
around 2s
Short press "Power" button
Short press "Power" button
Long press " " button 3 sec
Long press " " button 3 sec
Short press " " button
Short press " " button
Red LED slide on
Red led turn down
Pairing mode: blue LED flashes 1 time per 1 sec
Connected mode: blue LED slide on
Red LED flashes 2 times per 1 sec
Blue LED flashes 1 time per 1 sec
Blue LED slide on
When battery voltage less than 3.3V, red LED flashes 1
time per 1 sec
Tips
You will hear "power on" and LED flashes
blue per 1 sec
LED flashes red for 2 seconds and
sounds "Power off"
LED flashes blue and red alternately when
entering the pairing mode, at the same
time it sounds "ready to pair, turn code
0000" voice prompt.
Successfully pairing: Pairing complete or
Connected (second connect)
Red LED flash 2 times per 1 sec (voice
prompt: beep)
Blue LED slide on
Blue LED slide on
Red LED flashes 2 times per 1 sec (voice
prompt: beep)
Blue LED slide on (voice prompt: beep)
Blue LED slide on
Blue LED slide on
Blue LED slide on
Blue LED slide on
Blue LED slide on
Blue LED slide on (when increase to the
max sound, voice sounds "beep")
Blue LED slide on (when adjust to the
minimum sound, voice sounds "beep")