Download Print this page

Technical Specification - Champion HBT400 User Manual

Hide thumbs

Table of Contents

Available languages

Charging the Battery

Open the plastic plug of USB connector. Connect the micro USB charging cable to any

power source and the USB connector of your headphone for charging.

The headphone LED turns to solid red during charging. It takes about 2 hours for the charge.

When the battery is fully charged, the LED turns off.

Low battery: when battery voltage is below 3.3V, red LED flashes 1 time per 1s; once less

than 3.0V, the headphone turns off.

Note: It is strongly recommended fully charging for the first use.

Pairing with Bluetooth Devices

Pairing the headphone with a phone

Make sure the headphone is off, Long press power button around 4 seconds, then enter into

paring mode.

Start Bluetooth function on your phone or other devices, then search for new devices.

Select the "HBT400" to pair.

If your unit ask you to enter the PIN code, please enter 0000 (4 zero).

Once successfully paired, the blue LED is always on and you will hear "Connected".

Pairing the headphone with a computer

Before pairing the headphone with your computer, please make sure your computer or

laptop has the built-in Bluetooth feature. If not, you must use a Bluetooth dongle, preferably

version 2.1 or above.

Long press power button around 4 seconds, then enter pairing mode.

Start the Bluetooth program in the computer. Then selected "Search new device".

Select the "HBT400" to pair.

Use headphone to enjoy music, watch TV or movies, play games and more.

Re-connected: if your phone or other devices connected before, then headphone will

automatically reconnect.

Line-in Connect: when without Bluetooth function, it can work to plug line-in cable as wired

headphone.