Bosch KGE Series Instructions Manual page 8

m
Warning
Danger of electric shock!
If the connecting cable is not long enough, do
not under any circumstances use
multiple sockets or
extension cords. Instead, contact customer
service for alternative solutions.
The device complies with protection class I.
Connect the device to a
installed 220–240 V/50 Hz AC outlet with
ground wire. The socket must be protected
with a 10 A to 16 A fuse.
For appliances that are used in non-
European countries, check whether the
connection voltage and the type of current
correspond to the values of your
electricity network. You will find this
information on the type plate, fig.4.
m
Warning
Under no circumstances may the device be
connected to electronic
energy saving plugs.
Mains power inverters and sine wave
inverters can be used for our devices.
Mains power inverters are used in
photovoltaic installations that are directly
connected to the public
power grid. For stand-alone systems (eg on
ships or in mountain huts) that do not have
a direct connection to the public electricity
grid, a sine wave inverter must be used.
Meeting with
the device
Unfold the last page with the images. This
manual applies to more than one type.
The equipment of the models may
vary.
Small deviations in the images are possible.
Fig. !
* Not on all models.
a
Cold room
B
freezer room
1-9
Controls
10
Lighting (LED)
11
Glass shelf in the cooling
12*
compartment Bottle rack
13
Fresh cool compartment
14
vegetable drawer
15*
Butter and cheese box
16*
Storage compartment in the door "EasyLift"
17
Compartment for large bottles
18
Freezer drawer (small)
19
Glass shelf in the freezer
20
compartment Freezer drawer (large)
21
Defrost water drainage channel
22
screw feet
NL
85