1) Open the set from the Box and Put on set on flat place.
2) Detach the stand moving button.
3) Unscrew the 4EA screw from Back cover.
4) Disassemble the bottom of Cabinet by hand
*Caution : Handle with care from scratch
DISASSEMBLY
5) Disassemble the bottom of Back cover by hand.
*Caution : Handle with care from scratch and latch broken Pull
6) Disassemble LED Harness, eDP cable, Camera Harness
and Tape.
7) Unscrew the 7EA screw to detach Rear shield from LCM.
- 16 -
Copyright ©
Only training and service purposes.
back cover softly to disassemble the latch
i) Bottom disassemble → ii) Left/Right side disas-
semble → iii) Top disassemble
② Camera
④Tape
SCRE
W
-
LG Electronics Inc. All rights reserved.
③ eDP
① LED