Sharp AQUOS wish User Manual page 48

Add Wi-Fi network
1. Tap Home screen >
panel and tap .
2. Tap Network & internet.
Make sure the Wi-Fi function is enabled.
3. Tap Wi-Fi.
4. If the Wi-Fi network you want to connect to is not on the list, scroll to the bottom of
the list.
5. Do either of the following:
• Tap Add network and enter the SSID, select
the security protocol, configure any advance
options (if necessary), and tap SAVE.
• Tap to join Wi-Fi by scanning a QR code.
Advanced Wi-Fi settings
1. Tap Home screen >
panel and tap .
2. Tap Network & internet.
3. Tap Wi-Fi.
4. Scroll to the bottom of the list, and tap Wi-Fi
preferences. Then enable or disable turning on
Wi-Fi automatically, public networks notification,
or tap Advanced to set up more advanced
options.
or slide down the status bar, extend the quick settings
or slide down the status bar, extend the quick settings
48
Chapter 6: Using Internet