Troubleshooting - Garmin Montana 650 Owner's Manual

Troubleshooting

Problem
The screen does not
respond How do I
reset the device?
I want to reset all the
customized settings
back to the factory
defaults
My device does not
acquire satellite
signals
My device will not
charge
My battery gauge does
not seem accurate
The batteries do not
last long
Montana 600 Series Owner's Manual
Solution
1 Remove the batteries
2 Reinstall the batteries
NOTE: This does not erase any of your data or settings
Select > Setup > Reset > Reset All Settings
1 Take your device out of buildings and parking
garages, and away from tall buildings and trees
2 Turn on the device
3 Remain stationary for several minutes
• Ensure that the lithium-ion battery pack is properly
installed (page
• Ensure the temperature is between 32°F and 113°F
(from 0 to 45°C)
• Turn down the backlight
1 Leave the device on until the battery runs out
2 Fully charge the battery without interrupting the
charge cycle
To learn how to maximize the battery life, see
2)
(page
(page 3)
Appendix
6)
page 46
59