Page 1
ROMERA TV STAND ASSEMBLY GUIDE SCAN ME www.furniturebox.co.uk Scan QR code for more tips, advice and assembly video or visit furniturebox.co.uk/club/romera-TV-stand...
Page 2
Important - Please read these instructions fully before starting assembly SAFETY AND NO POWER TOOLS CARE ADVICE SAFETY AND CARE ADVICE • Check you have all the components and • Only clean using a damp tools listed. cloth and mild detergent, do no use bleach or •...
Page 3
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START. NOTE: The quantities above are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. www.furniturebox.co.uk...
Page 4
STEP Use a clear, flat, soft surface to avoid bumps or scratches. Palace bottom panel [1} upside down on the floor and attach feet blocks [2] and [3] using washer [A] followed by screw [B] in each hole. Tighten with Allen key [H] STEP Turn over bottom panel [1] so it rests on its feet.
Page 5
STEP Add shelf [6] - carefully align holes in shelf with dowels and cam bolts. Add 2 x wooden dowels into the top of shelf panel [6]. Tighten the cam nuts below shelf [6] to secure it into place. www.furniturebox.co.uk...
Page 6
STEP Add another side panel [4] on top of shelf [6]. Add 2 x wooden dowels and 2 x cam bolts into the thin edge of the side panel. Pop cam nuts into the corresponding holes in the side of panel [4] STEP ATTENTION: Carefully align top panel [7]...
Need help?
Do you have a question about the ROMERA and is the answer not in the manual?
Questions and answers