What To Do If - Gastro-Cool GCGBIB20 Manual

17 What to do if... troubleshooting
The design of the appliance guarantees interruption-free operation and a long
service life. However, if a fault does occur during operation, check whether it can
be traced back to an operating error.
You can eliminate the subsequent faults by yourself by checking the possible
causes:
Fault
The appliance is
not cooling.
The appliance
is noisy when
operating.
Water is pooling
at the bottom of
the refrigerator.
The appliance
is not cooling
correctly.
Possible Causes
Is the mains plug in the
socket?
Has the fuse in the socket
been triggered?
Is the appliance aligned
vertically and horizontally?
Has the temperature
regulator been set correctly?
Is the condensation
waterdrain blocked by dirt?
Is the condensation drain
blocked by bottles on the
bottom?
Is the appliance ventilation
blocked?
Measures
Insert the mains plug correctly
in the mains socket, switch on
the fuse, if required call for
expert assistance.
Adjust the appliance using the
supports.
Flow noises in the refrigerant
circuit are normal.
Correct the temperature
regulator setting.
Clean the drain with a pipe
cleaner or a small brush.
Place the bottles on a shelf.
Clear the ventilation slot,
position the appliance with
sufficient space.
47