Switching On The Led Door Lighting (Optional); Changing The Door Film - Gastro-Cool GCGBIB20 Manual

11 Switching on the LED door lighti ng
(opti onal)
The light switch for the LED door lighti ng is located in the bott om frame of the
door on the left -hand side.
12 Shanging the door fi lm
In order to provide the door with a picture or adverti sing slogan, loosen the
three screws on the top door frame and remove the frame.
The fi rst ti me a change is made, pull the black protecti ve fi lm upwards out of
the door. Then push in the new translucent (transparent) fi lm from above. the door. Then push in the new translucent (transparent) fi lm from above.
Alternati vely the perspex panel, which lies be-neath the protecti ve foil, can also Alternati vely the perspex panel, which lies be-neath the protecti ve foil, can also
be covered with an adhesive. Then put the frame back in positi on and fasten the be covered with an adhesive. Then put the frame back in positi on and fasten the
three screws.
43