Canon Creative Park Nikko Toshogu Shrine Yomeimon Assembly Instructions Manual page 14

Nikko Toshogu Shrine (Yomeimon) : Assembly Instructions
Roof tile parts
Curve each roof tile part
along each curve and
attach the glue tabs to
the straight part of the
bottom side.
18C(19C)
18D(19D)
Assembling the Roof
Use the 19th to 21st pages of the parts sheet.
Attach 18D (19D) to 18C (19C) and 18C (19C) to 18B (19B) in this order. Then, attach them to the roof made on page 13.
Attach 20D (20N) ~ 20A(20K) in this order, and attach 20E(20O) to 20A(20K). Then, attach them to the roof made on page 13.
Assemble 18E (19E)-18H (19H) and attach them to 18B (19B). Likewise, assemble 20F (20P)-20I (20S) and attach them to 20B (20L).
In the same way, assemble the remaining roof tile parts and the rest (18I (19I)-18N (19N)) and attach them on the roof.
Assemble 20J, 20T, and 20U and attach them to the top of the roof.
PAGE14
20T
20U
18E(19E)
18F(19F)
18H(19H)
18G(19G)
18B(19B)
*You will find short blue lines in the center of the side
that needs to be attached. Align them to attach, starting
from the center to the outer side.
Add some glue on the edge to attach.
20J
20H(20R)
20F(20P)
20E(20O)
20I(20S)
20Q(20G)
20A(20K)
20B(20L)
20C(20M)
20D(20N)