Vector X2 Operation Manual page 9

V
ECTOR
5.3 Set Time Schedules
Overview
Up to 12 time and weekday programs or annual holidays can be programmed (Pr01 to Pr12).
5.3.1 Time schedule enable/disable
Overview
This section describes how to generally enable/disable timed events (schedules) on a X2 device.
Procedure

1. Press the ( /
➔ SEL and the actual Date and Time are displayed alternatingly.
2. Press the ( ) button briefly to go to the scheduler submenu.
➔ PRO and SEL is displayed.

3. Press the ( /
OFF or ON.

Press the ( /
➔ When schedule is ON,
Press the ( ) button (1x) to go back to the previous submenu.
5.3.2 Set weekly time schedules
Overview
This section describes how to set a daily, weekly repeated action/function.
Up to 12 time and weekday programs can be programmed (Pr01 to Pr12).
Requirements
Time schedule is enabled (see chapter 5.3.1).
Procedure

1. Press the ( /
➔ SEL and the actual Date and Time are displayed alternatingly.
2. Press the ( ) button briefly to go to the scheduler submenu.
➔ PRO and SEL is displayed.

3. Press the ( /
OFF or ON.

4. Press the ( /
➔ When scheduler is ON,
5. Press the ( ) or ( ) button to select between programs
Pr 01...Pr 12.
Doc: 70-00-0950A, Serie X2, 20211220
Subjects to alteration
) button longer than 2 seconds.
) button: Schedule status indicates whether it is
) button to change the status.

is displayed.
) button longer than 2 seconds.
) button: Schedule status indicates whether it is
) button to change the status.

is displayed.
© Vector Controls GmbH, Schweiz
www.vectorcontrols.com
X2-O M
PERATIONS
B D
ANUAL UTTON ISPLAY
Page 9-16