Using The Rock 'N Roller; Operating The Colorado - Garmin Colorado 300 Owner's Manual

Using the Rock 'n Roller

When searching for and selecting different functions on
the Colorado, use the Rock 'n Roller.
• The Rock 'n Roller rotates clockwise and counter-
clockwise, and can be used to move through the
lists on any of the Colorado screens and to zoom in
or out on the map.
• Highlight options and pan the map by pressing up,
down, left, or right.
• To select a highlighted item, press the ENTER key
in the center of the Rock 'n Roller.
Colorado Series Owner's Manual
™

Operating the Colorado

Power key—press and hold the
the Colorado on or off. Press quickly and release to
access the System Status page.
Select—highlight an area on the screen with the
Rock 'n Roller and press ENTER to make a selection.
Soft keys—the Left soft key and the Right soft key are
used to access specific functions that appear on the soft
ENTER key
key labels.
Restore Defaults—factory settings that are saved in
the memory of the Colorado. If you customize the
settings on the Colorado, you can revert to the factory
settings by choosing Restore Defaults.
Right soft key
Soft key label
G S
ettInG tarted
Power key to turn