Pairing The Device - Nokia AD-5B User Manual

All manuals and user guides at all-guides.com
G e t t i n g s t a r t e d

Pairing the device

Switch on the headset power before you start to pair your
headset with the Nokia Wireless Audio Adapter. Make sure no
other headsets or other compatible audio devices are active
within a 10 metre range.
1. Check the headset user guide to familiarise yourself with
how to pair your headset .
2. Attach the adapter to the Pop Port connector of your
phone. Wait for the slow red blink. Select the PIN entry
mode by pressing the Control key once in the Wireless
Audio Adapter to make the adapter find the compatible
headset.
If there are no headsets with compatible Bluetooth
wireless technology within a 10 metre range, the light
indicator blinks red to indicate an error situation. The
adapter then goes into Init mode and blinks slowly a red
light. See "Modes of the light indicator" on page 10.
3. If a compatible headset is found, the light indicator of the
adapter is continuously green for 20 seconds. Key in your
four-digit Bluetooth passkey on the phone to pair the
headset in this time period. The digits appear on the phone
display. End your passkey entry by pressing
The Bluetooth passkey is marked on the card that is
provided in the sales package of the headset.
If the pairing is successful, the phone display is cleared. The
light indicator on the Nokia Wireless Audio Adapter is
turned off and
8
appears on the phone display.
.