Advertisement
RPK4-HD1101
Identifying the HVAC system in your vehicle
TEMPERATURE
FAN SPEED
Single Zone
of the knob opening and verify that they click into place. To avoid damage to the kit or the inserts make sure that the inserts are
positioned correctly and very little force should be used when seating them.
Single Zone
HVAC System Setup
Initial HVAC type selection.
1. When the ignition is turned to the on position and the kit is powered up in the vehicle
should be shown on the display.
2. This tells you that you are in programming menu 2 along with the current selection on the right of the display which in this
case is 1. The available selections are as follows:
1. Coupe (2 Door) with Dual Zone Climate Controls
2. Sedan (4 Door) with Dual Zone Climate Controls
3. Coupe (2 Door) with Single Zone Climate Controls
4. Sedan (4 Door) with Single Zone Climate Controls
5. Coupe (2 Door) with Dual Zone Climate Controls (Hybrid*)
6. Sedan (4 Door) with Dual Zone Climate Controls (Hybrid*)
* Hybrid modes are a combination of Dual and Single Zone Climate controls.
3. Using the Fan Up
4. Once the desired selection is shown, press the rear defrost button
P
ifi A
C
ti
DRIVER
TEMPERATURE
and Fan Down
buttons change the current selection to match the factory system in the vehicle.
© 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
DUAL
BUTTON
PASSENGER
TEMPERATURE
Dual Zone
(next to the
PAC-audio.com
Complete Radio Replacement Kit with
Integrated Climate Control Retention for
2003-2007 Honda Accord
DRIVER
PASSENGER
TEMPERATURE
TEMPERATURE
DUAL
BUTTON
Dual Zone
Dual Zone
to save and exit.
button)
Rev: V8
Date: 081318
Page 6
Advertisement
