Technical Data; Cordless Impact Wrench - DeWalt DCF891 Original Instructions Manual

EnGLIsh
18V CORDLESS IMPACT WRENCH
DCF891, DCF892
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
Power output
No load speed
Impact rate
Max tightening torque
Precision Wrench™ mode
Low Mode
Medium mode
High mode
Max breakaway torque
Tool holder
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑2:
L (emission sound
PA
pressure level)
L (sound power level)
WA
K (uncertainty for the
given sound level)
Vibration emission value
a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
24
WALT one of the
e
DCF891 DCF892
V 18
DC
1
Li‑Ion
W 760
min ‑1 0–2000 0–2000
min 0–3250 0–3250
‑1
Nm 812
Nm 136
Nm 406
Nm 812
Nm 1084
1/2" (13 mm) 1/2" (13 mm)
kg 1.67
dB(A) 91
dB(A) 102
dB(A) 3
m/s 10
2
m/s 2 1.7
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
EC‑Declaration of Conformity
Machinery Directive
18
1
18V Cordless Impact Wrench
Li‑Ion
DCF891, DCF892
760
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841‑1:2015, EN62841‑2‑2:2014.
These products also comply with Directive 2014/30/EU and
812
2011/65/EU. For more information, please contact D
136
the following address or refer to the back of the manual.
406
The undersigned is responsible for compilation of the technical
812
file and makes this declaration on behalf of D
1084
1.67
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
65510, Idstein, Germany
91
29.08.2021
102
DECLARATION OF CONFORMITY
3
THE SUPPLY OF MACHINERY (SAFETY)
10
1.7
D WALT declares that these products described under
e
"technical data" are in compliance with:
EN62841‑1:2015, EN62841‑2‑2:2014
These products conform to the following UK Regulations
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended).
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
REGULATIONS 2008
18V Cordless Impact Wrench
DCF891, DCF892
WALT at the following
e
WALT at
e
WALT.
e