Trouble Shooting; Machine Dismantling - Gaggia TS Operating Instructions Manual

ENGLISH
8

TROUBLE SHOOTING

PROBLEM
Machine switch off
No water in boiler
No unit delivery
Steam fails to come out of
the nozzle
Too much water in the boiler
Wet coffee dregs
Coffee dispensing too slow
Coffee dispensing too fast
9

MACHINE DISMANTLING

To dismantle the machine we recommend that it is dismantled
and the parts separated according to the type of materials involved
(plastic, metal, etc). The parts separated in this way are then to be
sent to the relative specialized disposal companies.
CAUSE
1. Machine switch off
2. Cable not properly connected
1. Water tank empty
2. Tank plates not inserted
3. Motor driven pump not in operation
1. motor driven pump out of order
2. unit solenoid valve out of order
3. unit switch out of order
1. too much water in boiler
2. damaged resistance
3. clogged sprayer element
4. resistance saver engaged
1. the motor driven pump remains
engaged
2. perforated exchanger
3. automatic charge solenoid valve
blocked
1. Grinding regulated too fine
2. Unit still cold
3. Solenoid valve fails to discharge
1. grinding element set too fine
2. dirty filter-holder
3. clogged unit
4. Solenoid valve partially clogged
1. grinder is regulated too large
REMEDY
1. position the machine switch to position 1
2. Connect power cable
1. Fill tank
2. Insert plates into tank
3. contact specialized personnel
1. contact specialized personnel
2. contact specialized personnel
3. contact specialized personnel
1. see specific problem
2. contact specialized personnel
3. clean the sprayer element
4. reinsert the resistance
1. contact specialized personnel
2. contact specialized personnel
3. contact specialized personnel
1. Adjust grinding value
2. wait for the machine to reach the
correct temperature
3. contact specialized personnel
1. Adjust the grinder
2. replace the filter and undertake more
frequent filter-holder cleaning
3. contact specialized personnel
4. contact specialized personnel
1. regulate the grinding
26