Step 3 : Detach 17P FFC at connector (P1902) on the Jack
P.C.B..
Step 4 : Detach 6P FFC at connector (P1901) on the Jack
P.C.B..
Step 5 : Remove the Jack P.C.B..
Caution : During assembling, insert the Jack P.C.B. into the
ribs of the Front Cabinet Unit.
9.7.
Disassembly of NFC P.C.B.
• Refer to "Disassembly of Rear Cabinet Block"
Step 1 : Lift up the 11P FFC from the Slot.
Caution : During assembling, ensure that the 11P FFC is
properly seated into the slot.
Step 2 : Lift up the NFC P.C.B..
22