Solving Copying Problems; Product Makes Noise, But Nothing Copies; Product Makes Noise When It Sits For A While - Epson ET-3850 User Manual

Starting a Scan Using Epson ScanSmart
Starting a Scan from a Scanning Program
Starting a Scan from a Smartphone or Tablet
Starting a Scan Using the Product Control Panel

Solving Copying Problems

Check these solutions if you have problems copying with your product.

Product Makes Noise, But Nothing Copies

Product Makes Noise When It Sits for a While

Copies Have Incorrect or Faint Colors
Position, Size, or Margins of Copies are Incorrect
Parent topic:
Product Makes Noise, But Nothing Copies
If your product makes a noise, but nothing copies, try these solutions:
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• If the nozzle check page does not print, but the product's power is on, make sure your product
software is installed correctly.
• Make sure your product is level (not tilted).
Parent topic:
Related concepts
Print Head Nozzle Check
Print Head Cleaning
Product Makes Noise When It Sits for a While
Your product is performing routine maintenance. This is normal.
Parent topic:
Solving Problems
Solving Copying Problems
Solving Copying Problems
231