Toro Z Master Professional 7500-D Series Operator's Manual page 12

142-6728
1. Chassis (15 A)
2. Accessory (15 A)
3. Main (25 A)
1. Read the instructions before servicing or performing
maintenance.
2. Time interval
3. Check the engine-oil level.
4. Check the coolant level; refer to the Operator's Manual for
further instructions.
5. Check the tire pressure (2 locations)
6. Check the hydraulic-fluid level; refer to the Operator's Manual
for further instructions.
7. Check the oil level in jackshaft.
8. Grease the deck-drive PTO; refer to the Operator's Manual
for further instructions.
142-7838
1. Torque the wheel lug nuts
to 95 ft-lb (129 N∙m) (8x)
decal142-6728
4. Power port (15 A)
5. Fan, photo relay
decal142-7838
2. Read and understand
the Operator's Manual
before performing any
maintenance; check the
torque after the first 100
hours, then every 500
hours, thereafter.
142-7835
9. Check the air cleaner
10. Grease the idler pivots; refer to the Operator's Manual for
further instructions (3 locations)
11. Grease the front caster wheel bearings; refer to the Operator's
Manual for further instructions (4 locations)
12. Grease the front caster pivots; refer to the Operator's Manual
for further instructions (5 locations)
13. 96 and 144-inch Models
14. 144-inch models only
15. Check the oil level in the wheel drive gearbox (2 locations)
12
decal142-7835