Table of Contents
Advertisement
Power Articulating Leg Rests
The power articulating leg rests maintain the correct knee-
to-heel measurements when the user's legs are being
elevated and can be adjusted either as a pair or individually.
See figure 13. The power articulating leg rests provide 70°
or 80° of movement, have standard swing-away/height and
depth adjustable calf pads (see figure 17), accept all foot
plates, and have a maximum weight capacity of 300 lbs.
(136 kg). They are available with all power bases that support
upgraded electronics and with the Synergy Seating System.
The power articulating leg rests operate through the power
chair controller or toggle switch.
NOTE: Operation instructions using the joystick 4-way
toggles are discussed below. If you are using a different
toggle, the Attendant Control Module, or a different
operating device, please refer to the operation manual
supplied with that device and/or your power chair
owner's manual.
To operate the combined leg rests:
1. Push the toggle switch to the right to elevate both leg
rests.
2. Push the toggle switch to the right, release, then push to
the right again to lower both leg rests.
NOTE: For information on operating individual power
articulating leg rests, please refer to the operation
manual that refers to the operating device you are using,
or contact your Pride/Quantum Rehab Provider.
Swing-away Power Articulating Leg Rests
The swing-away power articulating leg rests are operated
the same way and have the same features as the power
articulating leg rests but have an added swing-away feature
which enables you to rotate the leg rests to the side before
you transfer onto or off of your power chair.
To rotate the swing-away power articulating leg rests:
1. Push in the release lever. See figure 14.
2. Rotate the leg rest.
BASIC OPERATION INSTRUCTIONS
Figure 13. Power Articulating Leg Rests
Figure 14. Swing-away Power Articulating Leg Rests
13
Release Lever
Advertisement
Table of Contents
