Step 4 Install Esp - Omron MS-890 User Manual

Install ESP
Step 4 — Install ESP
Easy Setup Program (ESP) is Omron Microscan's proprietary setup and testing
application. The purpose of ESP is to provide a quick and easy way to set up and
configure Omron Microscan products.
When the MS-890 is connected to a host computer (Windows Vista, XP, or 2000), ESP
can be used to set up communication with a host, configure various firmware settings, and
control verification processes.
Important: To migrate MS-880 settings to MS-890 settings in ESP, refer to the
If installing from the Omron Microscan Tools Drive:
1. Insert the Omron Microscan Tools Drive into a USB port on your computer.
2. Choose ESP Software from the main menu.
3. Select the Current Version of ESP and follow the file download prompts.
If downloading from the Omron Microscan website:
1. Go to http://www.microscan.com/downloadcenter
2. Create a new "myMicroscan" member account or, if you are already a member, enter
your user name and password.
3. Click the Download Software link and extract the latest version of ESP to a directory
of your choice. Note where your ESP.exe file is stored on your hard drive.
4. At the end of the installation process, the following icon will appear on your desktop:
5. Click the ESP icon to start the program.
System Requirements for ESP
• 233 MHz Pentium PC
• Windows 8, 7, Vista, or XP operating system (32-bit or 64-bit)
• Internet Explorer 5.0 or higher
• 128 MB RAM or greater; 160 MB free disk space
• 800 x 600 256 color display (1024 x 768 32-bit color recommended)
1-6
beginning of Chapter 2,
MS-890 Industrial Automation Scanner User Manual
Using ESP.