Step 2 Connect The System - Omron MS-890 User Manual

Step 2 — Connect the System
Standalone
Caution: Be sure that all cables are connected BEFORE applying power to the system.
Connecting the MS-890 Standalone
1. Attach the configuration cable to either the 9-pin (preferred) or 25-pin connector (on
bottom of unit) to configure, test, and default the scanner.
2. Attach the power supply cable to the 3-pin power connector on the bottom of the scanner.
Chassis
ground
2
3
Power +10 to 28
VDC (in)
MS-890 Industrial Automation Scanner User Manual
Always power down BEFORE disconnecting any cables.
9-pin host configuration connector
Power
ground
1
Power
connector
With Wiring Box
2 Receive
3 Transmit
5 Signal ground
25-pin host connector
1
Power
Ground 17
18
Power
Quick Start
25
4
3
2 1
Trigger connector
1-3