Step 3 Position Scanner And Symbol - Omron MS-890 User Manual

Step 3 — Position Scanner and Symbol
• Set up a symbol at the distance that will be used in your application.
Scan range starts here
Scan Range Starts Here
Note: Code 39 is the default symbology enabled. If you are uncertain as to the symbology
type in your application, enable all symbologies by clicking the Autodiscriminate button
in EZ Mode.
Important: If using Interleaved 2 of 5 symbols in your application, verify that the number
of characters in the symbols being scanned matches the symbol length enabled for
the Interleaved 2 of 5 symbology (default is 10 and 6).
MS-890 Industrial Automation Scanner User Manual
Centerline of
Center line of
scan window
scan window
Quick Start
1-5