C&K systems ST800L+ User Manual page 8

13:0. FAULT CLEARING
SYMPTOM
Zone light on continuous
in day.
Tone pulsing on exit.
Tone continues to pulse
after exit.
Alarm triggers on exit.
Alarm triggers on entry.
Tamper light continuous
to flash.
No mains light.
Panel appears dead (no
mains light).
ZONE No
1
2
3
4
5
6
7
8
Please Note:
CAUSE
Alarm activated. Do a panel reset.
Zone in Fault. Leave protected area and wait
for tone to go continuous.
Zone in Fault. Check for open doors, or a
detector is in fault. Call your
installer.
Timer ran out. Go quicker to exit or call your
installer to extend exit time.
Timer ran out, Follow entry procedure. Call
deviated from entry your installer to extend entry
route. time.
Tamper fault. Call installer.
Mains off, fuse Switch mains on, check other
blown. mains appliances, and call
electricity supplier or installer.
Battery not taking Check mains is on. Call
over. installer to check battery.
AREA COVERED
ACTION