Outline Of Cooling Operation; Outline Of Automatic Operation - Mitsubishi SRK05CR-S Technical Manual & Parts Lists

(7) Outline of cooling operation

(a) Operation of major functional components in cooling mode
Compressor
Indoor fan motor
Outdoor fan motor
(b) Fan speed switching
Model
Fan speed
AUTO
HI
MED
LO

(8) Outline of automatic operation

(a) Determination of operation mode
The unit checks the room temperature, determines the operation mode, and then begins in the automatic operation.
Operation mode
(b) The unit checks the temperature every 0 minutes after the start of operation and, if the result of check is not same as the
previous operation mode, changes the operation mode.
(c) When the unit is started again within 0 minutes after the stop of automatic operation or when the automatic operation is
selected during cooling or dehumidifying operation, the unit is operated in the previous operation mode.
(d) Setting temperature can be adjusted within the following range. There is the relationship as shown below between the sig-
nals of the wireless remote control and the setting temperature.
Cooling
Setting
temperature
Dehumidifying
All manuals and user guides at all-guides.com
Cooling
Thermostat ON Thermostat OFF
ON OFF
ON
ON OFF
All model
Auto fan control
Speed 6
Speed 4
Speed 3
Room temperature ＜  ℃
Dehumidifying
Signals of wireless remote control (Display)
–6 –5 –4 –3
  0 
  0 
0
- -
Failure
OFF
ON ON
OFF
 ℃≦ Room temperature
Cooling
–2 –1 ±0 +1 +2
    
    
'15 • SRK-T-171
+3 +4 +5 +6
   0
   0