Honda Civic 2016 Manual page 557

uuClimate Control System MaintenanceuDust and Pollen Filter
Push
Tabs
Dust and
Pollen Filter
556
5. Push in the tabs on the corners of the filter
Cover
Push case cover, and remove it.
6. Remove the filter from the case.
7. Install a new filter in the case.
u Put the AIR FLOW arrow directed side
down.
1Dust and Pollen Filter
Models with glove box damper
NOTICE
When to install the dust and pollen filter:
1. Install the filter case cover.
2. Remove the driver's side claw at the bottom of the
glove box.
3. Pivot the glove box up into position. Install the
tabs back in place.
4. Open the glove box to angle of about 30 °.
5. Install the hook portion of the stop to the glove
box.
When Installing the stop, put a hand from the
bottom of the glove box.
6. Install the claw at bottom of the glove box.
After installing the glove box, open and close several
times and make sure the glove box is installed
properly.
Claws