Assembly Instructions - BE Power Equipment 96393-LJ Operator's Manual

PREPARATION PREPARATION
Before beginning assembly of product, make sure all parts
are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged,
DO NOT attempt to assemble the product. Please call
customer service at 1-866-850-6662 for assistance.

ASSEMBLY INSTRUCTIONS

1
AA
Power Unit Assembly
Install handle (B) to power washer unit (C). Secure with
screws (AA).
Note: DO NOT use a power screwdriver. When the
screw is completely tight, give a small final clockwise
twist of the screwdriver.
DO NOT overtighten.
Hardware Used:
AA
Screws
bepowerequipment.com
B
C
x 2
Estimated Assembly Time: 5 minutes.
Tools Required for Assembly (not included): Phillips
screwdriver.
2
A
OFF/O
Slide spray gun holder (A) onto left side, when facing the
power washer unit (C) as shown.
Note: This step does not require any screws.
C
ON/I
7