Advertisement
3
DELL P2719HC
Go to contents page
Disconnect the panel lamp cable from the connector
of panel module, then unplug the LVDS cable from
S14
the connector of the panel module by pushing the
earing-locks.
Take away the bracket chassis module and then put
S15
the bracket chassis module on a protective cushion.
Remove the Mylar from the hooks of the bracket.
Use a Philips-head screwdriver to remove
S16
screws for unlocking the AC power outlet.
( No.1~2 screw size=M3x8, Torque=6~7kgfxcm)
two
3
4
Use a Philips-head screwdriver to remove six screws
for unlocking the circuit board, release all the cables
S17
from the hooks.
(No.1~5 screw size=M3x7.5, Torque=6±0.5kgfxcm;
No. 6 screw size=M4x8, Torque=6±0.5kgfxcm)
2
Remove the interface board and power board from
the bracket chassis module carefully, and disconnect
S18
all the cables.
4
3
5
1
6
Advertisement
