Raider RD-GH15 User Manual page 9

9
to the heater.
Gas Heater
can be cleaned with detergents that do not contain abrasive or flammable
substances. Before cleaning, make sure that the device is cooled to the;
Important! Do not clean the equipment (nozzles, hoses, etc.) with pressurized water or strong
airflow.
Only original spare parts may be used for repair of the unit. For this purpose, please contact a
qualified service specified in the warranty card.
Before and after handling the gas heater, check the cylinder valve, nakranitsite and hose for
damage. In case of leakage turn off the ventilator from 9 button, then close the valve of the
gas bottle;
Required every two years refer to a specialized service center to check the working order of
the instrument;
We recommend replacement of valves reducible to be done every five years.
Keep your gas heater dust;
Protective grids (2 and 12) must be cleaned periodically;
Check and adjust the ignition electrode as it was shown in Fig. 5
After completion of all maintenance work or service work on the device, check the condition
of all components. Check all joints and connections for gas leaks
Circuit Diagram (Diagram №6)
Q1 switch to On. / Off.
F1 Safety thermostat
M1 Fan motor
Y1 Thermoelectric ignition -
fuse
Security Y2 solenoid valve
B1 thermoelement
B2 Piezo ignition
B3 electrode igniter
B4 Burner