Advertisement
Tooxy
Heart rate sensor
Ref :
482 105
ENGLISH
2.2 Start up
In standalone mode: Display the heart rate on the display screen. Take an
electrode in each hand. There is no need to squeeze them too tightly.
Preferably take the red electrode in your right hand and the yellow electrode in
your left hand.
The heart rate will be displayed after a few seconds. Several arrows are
displayed flashing under this value; they should be between 4 and 5. If the
displayed number is lower or higher, you should use the adjustment button to
adjust the amplification.
In connected mode: Adjust again if necessary (see adjustment in standalone
mode), then run the onboard software and the heart rate sensor will be
recognised. Start the acquisition.
3 Technical characteristics
Measurement range
Measurement precision
Number of decimals displayed in standalone
mode
4 After-Sales Service
This material is under a two year warranty and should be returned to our
stores in the event of any defects.
For any repairs, adjustments or spare parts, please contact:
JEULIN - TECHNICAL SUPPORT
27 019 EVREUX CEDEX FRANCE
4
0 to 220 bpm (beats per
minute)
± 1bpm of the maximum
value
1
Rue Jacques Monod
BP 1900
+33 (0) 2 32 29 40 50
Advertisement
