Installation Requirements; Data Label; First Use; Unpacking - Bush BRC100DHEB Instruction Manual

Installing your Freestanding Cooker
Bringing it all together

Installation requirements

THIS COOKER MUST BE INSTALLED
ACCORDING TO BS 6172: 2010 BY A SUITABLY
QUALIFIED GAS SAFE REGISTERED INSTALLER
IMPORTANT: CONTACT AN
AUTHORISED SERVICE AGENT FOR
INSTALLATION OF YOUR OVEN!
If you require any technical guidance or f nd that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Installing your Freestanding Cooker
14
RISK OF ELECTRIC SHOCK
DO NOT OPEN

Data Label

The Data Label is located on the rear of the
appliance.This appliance is suitable for Natural
Gas and Universal LPG; ensure that the available
gas supply matches the Data Label and the gas
type label.

First Use

IMPORTANT: When using your oven for the first time
your cooker may give off an unusual odour from the
heating elements and insulation materials. This is
normal for new cookers. To eliminate this odour run
the oven at 250 degrees for 40-60 mins with the
oven empty.

Unpacking

Carefully unpack and examine the appliance for
any damage. If you think there is a defect, do not
use the appliance and contact Product Support on
01759 487838.
Packaging materials should be collected
together and disposed of immediately as they
may be harmful to children.

Technical Data