S-Video Output: Connecting A Television - GPX D1816 Instruction Manual

S-Video Output: Connecting a Television

When connecting two products using an RCA Cable, match the colored ports with
the same colored connection. (Red to Red, White to White, and Yellow to Yellow)
1. Connect an S-Video Cable (not included) to the S-Video Output on the unit and
the S-Video Input on the Television.
2. Connect the RCA Cable to the Audio Outputs on the unit to the audio/video
inputs on the Television.
3. Turn the unit on by pressing the Standby Button.
4. Change the Output Mode setting on the unit to S-Video. See "The Setup Menu"
on page 10 & 11.
5. Change the television to the correct audio/video input setting.
6. Video played through the unit will now be seen on the Television.
Press the Video button on the remote control to cycle through S-Video, YUV, and
P-Scan.
RCA Cable
(included)
6
S-Video Cable
S-Video Cable