Table of Contents
Advertisement
APPENDIX A: REFERENCE
Back Panel
VIDEO
R-AUDIO-L
OUT
MONO
IN 1
3 CH. 4 Switch Selects the channel to which you will tune the TV to see the VCR picture if
you connect the VCR using the IN FROM ANT. and RF jacks.
AUDIO (R and L) and VIDEO IN Jacks Receives signals from another component, like a
VCR or camcorder, when it is connected to these jacks. Use INPUT on the remote to select.
AUDIO (R and L) and VIDEO OUT Jacks Sends signals from VCR to another component,
like a TV or VCR, when it is connected to these jacks.
IN FROM ANT. Jack Receives a signal from an antenna or cable system when attached.
OUT TO TV Jack Passes signal to TV using the cable supplied.
Indicator Panel
HI-FI
POWER
VCR
HI-FI Indicator Lights during playback when Tape Playback: HI-FI/LINEAR/MIX feature is set
to HI-FI.
POWER Indicator Lights when the VCR is turned on.
RECORD Indicator Lights when the VCR is recording.
STEREO Lights when the VCR is receiving a stereo signal, and you've selectd Stereo in the
Audio Menu.
SAP Lights when the VCR is receiving a SAP signal, and you've selected SAP in the Audio
menu.
TIMER Indicator Lights during an express or timer recording, or when the VCR is set for a
timer recording and the VCR is turned off. Flashes when a timer recording is set, and there
is no cassette in the VCR.
VCR Indicator (Applies Only if the VCR Viewing Channel is 3
or 4). Press the TV•VCR button to turn on or off.
•
VCR indicator on: Picture from VCR.
•
VCR indicator off: Picture from TV channel.
IN FROM
ANT.
VHF/UHF
OUT TO TV
3 CH. 4
STEREO
SAP
TIMER
RECORD
43
Advertisement
Table of Contents
