Table of Contents
Advertisement
APPENDIX A: REFERENCE
Will not Auto Channel Search active channels correctly
•
Check to make sure the antenna connections are secure and correct.
•
Check to make sure the Signal Type: CABLE/ANTENNA feature is set correctly.
•
If Detect Automatically was selected for the Signal Type in the AUTO CHANNEL SEARCH menu, try using either
CABLE TV or ANTENNA instead.
•
May not need to auto channel search if using a cable box. Refer to the VCR Channel List or contact your cable
company for more information.
Tape plays back in slow motion
•
Press PLAY to return to normal playback.
Cannot select channels over 69
•
Cable channels over 69 can only be selected if Signal Type: CABLE/ANTENNA feature is set to CABLE.
Cassette with safety tab removed does not start to play automatically
•
Check to make sure the Auto Play ON/OFF feature is set to ON.
TIMER indicator flashes
•
Check to make sure there is a cassette in the VCR when a timer recording is set.
Time counter disappears during searching
•
This is normal.
On-screen menus appear in English, French, or Spanish
•
Check Language feature.
No stereo sound during playback
•
Check to make sure the Playback: HI-FI/MIX/LINEAR feature is set to HI-FI to hear stereo sound during playback.
•
Must use the AUDIO/VIDEO jacks on the back of the VCR to hear stereo sound.
Stereo audio too noisy
•
Stereo signal is weak. Set Reception: STEREO/SAP/MONO feature to MONO.
•
Press one of the TRACK buttons to minimize the noise.
46
Advertisement
Table of Contents
