GE VG2052 User Manual page 7

Ge vg2052: user guide
Table of Contents

Advertisement

FIRST THINGS FIRST
Step 5: Tune the TV
Tune the TV to the VCR viewing channel. The VCR viewing channel
is channel 3 or 4 or the TV's video input.
If you connect your VCR using the IN (FROM ANT.) and OUT
(TO TV) jacks with RF coaxial cable, set the 3 CH 4 switch to
channel 3 or channel 4 — the channel you want to use on your
TV.
If you connect your VCR using the AUDIO/VIDEO jacks
with audio/video cables, select the TV's video input with
the remote's TV and INPUT buttons to see the signal. See page
51 for more information about your TV's input channel.
Step 6: Turn On the VCR
Press POWER on the VCR's front panel or VCR on the remote to
turn on the VCR. The first time you turn the VCR on, a menu screen
appears. This is the start of a QuickSet Guide which helps you pick
different options for your VCR.
Step 7: Using the QuickSet Guide
The QuickSet Guide is an automated procedure that helps you set
up your VCR. The first time you turn on your VCR, the first screen
of the Guide appears.
Select a language.
Seleccione un idioma.
Choisissez une langue.
1 English
2 Espanol
˜
3 Francais
1. Press 1 for English, 2 for Español (Spanish), or 3 for Français
(French).
The remaining menus throughout the set up will appear in the
chosen language. Just follow the step-by-step procedures until
setup is complete.
If the menu does not appear:
Make sure the TV is tuned to the same channel as the 3 CH 4
switch or its video input (see page 51 for more information).
(Continued on next page)
VCR Viewing Channel
AUDIO
OUT
VIDEO
AUDIO/VIDEO OUT Jacks
When using the IN (FROM ANT.) and
OUT (TO TV) jacks to connect your
VCR, tune your TV to channel 3 or 4.
The 3 CH 4 switch on the back of the
VCR determines which TV channel
is used to see the VCR's output.
When using the AUDIO/VIDEO jacks
to connect your VCR, tune your TV
to the TV's video input channel with
the TV and INPUT buttons on your
remote control. For more
information about selecting your
TV's input channel, see page 51.
IN
(FROM ANT.)
IN
RF
OUT
(TO TV)
CH
56
3
4
Channel 3/4 Switch
5

Advertisement

Table of Contents
loading

Table of Contents