Table of Contents
Advertisement
OTHER FEATURES
•
Pressing F.ADV repeatedly views single frames of the action
•
Pressing PAUSE or PLAY returns normal playback
Index Search
The VCR has a "VHS Index Search System" that automatically
records an index mark on the tape every time you start a
recording.
During playback you can locate the program you want to play
by the number of index marks or by scanning. The VCR will
search forward or reverse from the location you are on the tape.
To Search:
1. Press STOP.
2. Press SEARCH on the remote to display the INDEX SEARCH
on-screen display.
3. If you want to search through a certain number of index
marks, press two number buttons to enter the number of
marks you want to search. Press CLEAR on the remote to
correct an entry.
4. Press FORWARD to search forward or REVERSE to search in
reverse. The VCR will locate your index mark and begin
playback. If you did not enter a specific index number, the
VCR will locate the next index mark and begin playback.
5. Press STOP to end index searching.
Some index marks may be missed by the VCR:
•
A mark too close to your location on the tape
•
The mark at the beginning of a recorded segment of five
minutes or less
•
The first index mark on the tape when you start at the
beginning of the tape
INDEX SEARCH
Press REV OR FWD
to begin scanning
OR
enter a specific
index number
_ _
Press SEARCH to exit
INDEX SEARCH
Searching for
index number 12...
Press STOP to cancel
INDEX SEARCH
Searching for
index marks...
Press STOP to cancel
37
Advertisement
Table of Contents
