Remington POWERHAMMER 476 Operating Instructions Manual page 15

Safety Precautions
Shank
Plastic
Flute
LOAD
Overdriven Fasteners
An overdriven fastener results when too
strong of a power load is used causing
the piston to extend past the muzzle.
Move to the next lightest power load.
Repeated overdrive will damage your
tool. By avoiding overdrive, you can ex-
tend the life of your tool considerably.
NOTE: NEVER fire the tool without a
fastener. This can damage the tool and/
or cause possible injury to the operator.
IMPORTANT: If the tool does not open
after firing and the piston is overdriven,
see Piston Overdrive , page 18.
Head
G 018
Flat-headed
UNLOAD
15
G 018
Dome-headed