Operating The Tool - Remington POWERHAMMER 476 Operating Instructions Manual

Safety Precautions

OPERATING THE TOOL

1. ALWAYS hold tool perpendicular to
work surface.
2. Should the tool fail to fire, hold the
muzzle firmly against the work sur-
face for 30 seconds. Then remove
the tool, eject the load and safely
discard the misfired load into water
or oil. Return misfired power loads
to SGB Youngman or an approved
distributor.
3. ALWAYS use the spall shield when
driving directly into concrete or
steel. ALWAYS wear approved
goggles.
4. NEVER use a powder actuated tool
in an explosive or flammable atmos-
phere or when non sparking tools
are required.
POWER LOADS AND
FASTENERS
1. NEVER leave unfired power loads
on floors or work surfaces.
10