Subscribe to Our Youtube Channel
Related Manuals for TRAMEX THE DETERMINATOR CMP
Summary of Contents for TRAMEX THE DETERMINATOR CMP
- Page 1 CONCRETE MOISTURE PROBE ‘THE DETERMINATOR’ - CMP - QUICK START GUIDE www.tramexmeters.com...
- Page 2 GENERAL The Determinator and CME5, CMEX5 (or older Tramex Concrete Meters CME4 and CMEX2) allow for a unified gravimetric-based testing method of moisture content (%MC) both on the surface and within the body of the concrete. %MC readings for both the in-situ and the non-destructive surface tests eliminate confusion between different testing method...
- Page 3 OPERATION Probe Testing: Determine the approximate depth of the concrete slab. Connect extension segment(s) to appropriate depth: Concrete between 2" to 4" in depth shall require approximately 1 1/4" of probe depth. Concrete between 4” to 6” in depth shall require approximately 2 1/4”...
- Page 4 OPERATION Place your Tramex Concrete meter into the cradle of the CMP and ensure that all of the electrode spring-loaded pins are fully compressed, both on the CMP and the CME. Take 4 readings by turning the Concrete Moisture Probe and CME meter from ‘12 o’clock’...
Need help?
Do you have a question about the THE DETERMINATOR CMP and is the answer not in the manual?
Questions and answers