Product Specifications - Avermedia NX215 Manual

1.1 Product Specifications

Model
Type
NVIDIA GPU SoC Module
Compatibility
Networking
Display Output
Temperature
MIPI Camera Inputs
USB
Storage
Expansion Header
Input Power
Power Cord
Fan Module
Buttons
RTC Battery
PCB/Electronics Mechanical
Info
Certifications
NX215
Carrier board
It applies to NVIDIA® Jetson Xavier™ NX/ TX2 NX/ NANO
(B01) module
2x GbE RJ-45
1xM.2. key E 2230 for wifi (NANO doesn't support)
2x HDMI 2.0 (3840 x 2160 at 60Hz)
(NANO supports 1x HDMI 2.0 )
Operating temperature 0°C~70°C
Storage temperature -40°C ~ 85°C
Relative humidity 40 °C @ 95%, Non-Condensing
2x 2 lane MIPI CSI-2, 15 pin FPC 1mm Pitch Connector
1x 4 lane MIPI CSI-2, 36 pin FPC 0.5mm Pitch Connector
1x USB 2.0 Micro-B for recovery
3x USB 3.0 Type-A (1xinternal)
1x micro-SD card slot
1xM.2. key M 2280 for SSD
20 pins: 2x I2C, 1x UART, 4x GPIOs, 2xCAN (EU terminal
block)
DCINJACK on board & ATX 4pin
12V/5A, 12~24V is recommended.
US/JP/EU/UK/TW
Heat sink with fan (optional)
Power and Recovery
Support RTC battery and Battery Life Monitoring by MCU
120mm (W) x 90mm (L)
Weight: 125 g
CE, FCC,
NX215/NO115B/TN115B/NX215B User Manual
AVerMedia Technologies, Inc www.avermedia.com
9