Making Audio Interface Settings - Zoom R20 Operation Manual

Making audio interface settings

Settings can be made, including for the monitoring sound and output level.
Setting direct monitoring
This directly outputs the sound being recorded by the R20 before sending it to the computer, smartphone
or tablet. This enables monitoring without latency (direct monitoring).
1.
Tap on the audio interface Level Meter View Screen.
2.
Tap "Direct Monitor" "On" or "Off".
Setting
Off
On
NOTE:
• When in Multi Track mode (→
sound is from the pre-fader mix, so fader adjustments will not affect the volume.
• When in Stereo Mix mode (→
sound is from the post-fader mix, so fader adjustments will affect the volume.
This turns off direct monitoring. This outputs the sound being
recorded by the R20 after sending it to the computer, smartphone or
tablet.
This turns on direct monitoring.
Connecting computers, smartphones and
Connecting computers, smartphones and
142
Explanation
tablets), the direct monitoring
tablets), the direct monitoring