Table of Contents
Advertisement
C
ID S
ALLER
OLUTIONS
Problem
No Display
Caller ID Error Message
A
M
NSWERING
ACHINE
Problem
Can't hear messages,
Time/Day setting
stuck at 12 a.m Mon.
Answers on 10th ring
Incoming messages
are incomplete
Won't respond to
remote commands
All manuals and user guides at all-guides.com
Solution
•
Is battery fully charged? Try replacing the battery.
•
Make sure that the unit is connected to a non-switched electrical
outlet. Disconnect the unit from the plug and plug it in again.
•
Did you order Caller ID service from your local telephone
company? The display won't work unless you order Caller ID
service from your phone company.
•
The unit displays this message if it detects anything other than
valid Caller ID information during the silent period after the first
ring. This message indicates either the presence of noises on the
line, or that an invalid message has been sent from the
telephone company.
S
OLUTIONS
Solution
•
Adjust speaker volume.
beep, etc.
•
Set the time clock.
•
Make sure answering machine is turned on.
•
Memory may be full.
•
Was an extension phone picked up?
•
Memory is full.
•
Accidentally pressed PLAY/STOP button during playback and
stopped message.
•
Must use tone-dial phone.
•
Must enter correct security code.
•
Did unit hang up? If you take no action for a period of time, it
automatically hangs up.
33
Advertisement
Table of Contents
