Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TUYA SPF2000-W-TY
Summary of Contents for TUYA SPF2000-W-TY
- Page 1 SPF2000-W-TY Smart Pet Feeder Quick Start Guide...
- Page 3 Preface Quick start by the following steps: Scan the QR Code behind the Pet Feeder with your smartphone or • search 'Smartlife' APP from App store to download. Make sure the Wi-Fi indicator is rapidly blinking. If not, please reset •...
-
Page 4: Safety Notice
Safety Notice WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the Smart Pet Feeder and other property. Read all the safety notices below before using the Smart Pet Feeder. • Avoid high humidity or extreme temperatures. • Avoid long exposure to direct sunlight or strong ultraviolet light. -
Page 5: Technical Specifications
Technical Specifications Hopper Capacity • 7.5L Auto Feeding Time • 1-8 meals per day Microphone • 10 meters, -30dBV/Pa Speaker • 8 Ohm 1w • DC power cord Power • Backup batteries: 3 x D cell Dimension • 230 x 230 x 500 mm N. W. • 3.76 kgs Color • White... - Page 6 This guide will provide you with an overview of the product and help you get through the initial setup. Features: • Wi-Fi Remote control -Tuya APP smartphone programmable • Voice record & playback • Automatic & manual feeding -built in display and buttons for manual control and programming •...
- Page 7 In the box • Pet Feeder x 1 • Power Adapter x 1 • Quick Guide x 1 • Cord Hose Protector x 1 • Stand x 1 Please check the condition and the accessories of pet feeder after you open the box.
-
Page 8: Get To Know Your Device
Get to know your device Cover Buttons & display (Open the cover) Microphone Wi-Fi indicator Fault indicator lamp Food outlet Bowl Wi-Fi indicator The Wi-Fi status gives the following information: Wi-Fi Status What it means Flashing Pet Feeder has not joined the Internet. Steady light Pet Feeder has joined the Internet. - Page 9 Battery box Speaker Power jack Power switch Battery box 3 x D-size batteries. Please pay attention to the polarity. Please note that the battery charging is for backup purpose only. If you wish to control the pet feeder remotely, power supply is needed. Speaker Play sound.
-
Page 10: Button Introduction
Button Introduction: Lock. Hold the button for 6 seconds then release it to lock all buttons. Hold it again for 6 seconds then release it to unlock. Voice record/Reset network configuration. Press once to enter/exit the recording. The longest recording time is 10S. -
Page 11: Display Introduction
Display Introduction: Current Meal Key lock Total Meals Battery Level CURRENT Total Meals MEALS Feed Time TIME Current Portion PORTION : TOTAL System time Total Portion History Setup manually • Setup system time 1. Press 'SET', the Hour of system time starts flashing, press 'UP' to set the hour, and then press 'OK' to confirm. -
Page 12: Get Started
Get started To get started, you will need: • A Wi-Fi network. • A mobile phone with a mobile APP installed. Then follow the steps below: 1. Power on the Smart Pet Feeder. 2.Make sure the Wi-Fi indicator lamp is rapidly blinking. If not, please reset the network configuration. - Page 13 5. Confirm your Wi-Fi indicator is rapidly blinking. Then enter your home Wi-Fi account and password(Only support 2.4Ghz Wi-Fi) 6. Place the router, mobile phone, and Pet Feeder as close as possible 7. Waiting for connection 8. After the device has been added, you can use to rename the device.
-
Page 14: Wifi Network Configuration
4.2 WiFi Network Configuration FAQS: 1. Device not responding : Please confirm your WI-FI is 2.4 Ghz and the password is correct. - Page 15 2.More device-pairing FAQS: Connecting your device How to connect Step 1: Add device 1. Connect your device to the power source and turn it on 2. Open the App, select '+' on the top right of the home page to add device.
- Page 16 Step 2: Enter Wi-Fi Password Select the Wi-Fi through which the device can connect to the Internet, and enter the Wi-Fi password. Then click 'OK' to proceed to net-pairing. Only 2.4G Wi-Fi is supported at this moment, please check if the Wi-Fi network is 2.4G. Finally, wait a few seconds until it displays that network has successfully been paired.
- Page 17 5. Make sure the router password is correct. 6. Make sure the device has been added using 2.4G WiFi band. Enable the Wi-Fi broadcast function and do not set it to hidden mode. 7. Make sure that the encryption method of the router's wireless setting is WPA2-PSK and the authentication type is AES, or both are set as automatic.
- Page 18 try to turn off some device's Wi-Fi functions and configure it again. 10. If the router has enabled the wireless MAC address filter, try to remove the device from the router's MAC filter list to ensure the device is not prohibited by the router to connect to the network.
- Page 19 What if the device is off line 1. Please make sure the device has been powered on; 2. Please check if the network is stable. Checking method: put a mobile phone or an iPad next to the device and make sure they are connected to the same network, then try to open a web page;...
-
Page 20: App Overview
4.3 App Overview: Home management Add Device Location Voice Control Information Room Management Device List Home: 1.Device list You can check the added device, tap one to enter control board 2. Location information Information about your local weather conditions, outdoor temperature, PM 3.Home management Add or delete home and manage home names, rooms, locations, and... - Page 21 Device settings Total portion Manually feed Automatic feed Feeding records Add schedule for automatic feed Control board: Select the target Pet Feeder in device list then enter the control board •Automatic feed Tap to edit the schedule for the automatic feed. Schedule supports up to 8 items.
- Page 22 How do I install the stand Align the stand with the hole at the bottom. Gently push the stand into the hole at the bottom.
Need help?
Do you have a question about the SPF2000-W-TY and is the answer not in the manual?
Questions and answers