GE 28320EE2 Quick Setup Manual page 2

Telephone Cable Connection
To use the phone as standard telephone:
1. Plug one end of the telephone line cord into the PHONE jack on the back of the base
and the other end into a modular jack
IMPORTANT: Do not connect the telephone line until the handset is fully
charged. The base must be plugged into the AC power at all times.
Installation Note:
Your InfoLink is designed for home use and will work with most any
standard Internet system (non-commercial, non-corporate environments/
applications). This includes wired and/or wireless routers which provide
additional "hard" Firewall security functionality (HTTP Internet traffic
transmits inbound and outbound via Port 80, which is typically open on
most firewall set ups). However, this unit may not function properly behind
a firewall that does not allow http traffic inbound and outbound on Port
80.
The unit will not work with a dial-up internet connection.
Power Supply Connection
1. Connect the power adaptor provided with your unit to the base .
2. Connect the adaptor to an electrical wall outlet.
3. When power is applied to the base, the unit goes through a one minute initialization
process in the following sequence:
a) the blue DECT indicator is on (solid),
b) the green POWER indicator flashes,
c) both the blue DECT and green POWER
indicators flash; and
d) the green POWER and blue ETHERNET
indicators are on (solid).
The unit has now completed the process. The phone will not function until this process is
complete.
Handset Synchronization*
1. After base is powered up, wait 5-7 seconds until
RSS synchronization icon briefly appears on the handset display. This indicates that the
handset and base are synchronized to each other.
2. Next you will see the RSS Service Wizard which will guide you step through setup of
Weather and Weather Alerts. There are some useful channels pre-configured to help
get you started OR you can bypass the Wizard at this time and return later.
3. Programmed content windows will start auto scrolling and handset is ready for use.
Base Layout
POWER
ETHERNET
(indicator)
(indicator)
PAGE
DECT
(button)
(indicator)
ETHERNET Indicator (blue)
When flashing; indicates network error with last RSS update.
When solid; indicates properly working ethernet connection.
DECT Indicator (blue)
When flashing; indicates base is in handset registration mode.
When solid; indicates an active call.
POWER Indicator (green)
When solid; indicates base is powered.
Page button
Press to locate misplaced handset(s).
Handset Layout
Display
Navigational
(button)
Right soft
Left soft
(button)
(button)
Alert Indicator
Headset
jack
Call/
Speakerphone
(button)
END
(button)
FLASH
(button)
INT/a/A
(button)
CALLER ID
pause/#/lock
(button)
(button)
*
(button)
microphone
Left soft button Navigating The Menu
Selects the current menu item or confirms a setting, depending on the current screen.
Your phone has an easy to use menu system. Each menu leads to a list of options. When
Right soft button
the handset is in idle mode, press
"Back" button returns to the previous screen.
Press
Navigational/Volume button
Press
Press the up, down, left, or right arrows to navigate while in a menu or the RSS content
received it takes you to the Caller ID records. Press
screen. After a selection from a menu or article, press right arrow button to view.
If no button is pressed within 60 seconds, the handset will return to idle mode
During a call, press vol-/+ to increase or decrease the volume.
automatically. To cancel and return to idle mode at any time press
Alert Indicator
The following table outlines the main menu items:
If flashing, indicates you have voice mail waiting, or a weather warning if an RSS Wealther
Calls Lists
Alert has been selected.
Handset
Call/Speaker button
Initiates or answers a call. During a call, activates speaker.
Contacts
End button
Sounds
Ends a call. Also returns any RSS or menu function to idle mode.
Base Settings
FLASH button
Time Settings
Call Waiting acceptance; during a call, push to accept new incoming call.
Registration
Caller ID button
RSS Setting
Short press to view list of received calls. Press and hold to view list of dialed calls.
Help
Intercom/Lower/Upper case button
Help
Allows you to make High Definition (HD) calls between the handsets registered to the base.
When in text editor, switches from lower-case to upper-case letters.
Assistance with your feed set up and navigation buttons.
*
button
To Access Help via the Menu
When in text editor, provides a symbol table.
1. Make sure your phone is OFF (not in talk mode).
Pause/#/Lock button
2. Press
Allows you to input a pause while dialing or lock the keypad.
to open the main menu.
to navigate to the menu options you want.
to select further options or confirm the setting displayed, or if a new call was
to return to previous menu.
.
Access to received calls, dialed calls, and delete calls list.
Set preferences for handset name, language, menu color, wallpaper picture,
contrast, auto talk, regional and local area codes, and default settings.
Add, edit or delete entries to your phonebook listings.
Set preferences for volume, ringtones, ringer volume and keypad.
Displays IP address.
Set date and time, select time format, set alarm clock feature.
Register and de-register handsets to base.
View and set up RSS channels, reset RSS to default channels.
Detailed info. for use of Feed set up and navigation button.
, navigate to the Help menu, press to enter.