Download Print this page
GE 28111EE2 User Manual
GE 28111EE2 User Manual

GE 28111EE2 User Manual

Dect 6.0 cordless handset speakerphone system

Advertisement

Quick Links

Model 28111 Series
25840
Telephone Network Information
DECT 6.0 Cordless Handset
Should your equipment cause trouble on your line which may harm the telephone network,
the telephone company, where practicable, may notify you that temporary discontinuance of
service may be required. Where prior notice is not practicable and the circumstances warrant
Speakerphone System
such action, the telephone company may temporarily discontinue service immediately.
The telephone company may make changes in its communications facilities, equipment,
User's Guide
operations or procedures where such action is required in the operation of its business. If
these changes are expected to affect the use or performance of your telephone equipment,
the telephone company will likely give you adequate notice to allow you to maintain
uninterrupted service.
Notice must be given to the telephone company upon termination of your telephone from
your line.
REN Number
On the bottom of this equipment is a label indicating, among other information, the Ringer
Equivalence Number (REN) for the equipment.
The REN is useful in determining the number of devices you may connect to your telephone
line and still have all of these devices ring when your telephone number is called. In most (but
not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To
be certain of the number of devices you may connect to your line as determined by the REN,
you should contact your local telephone company.
REN Number is located on the cabinet bottom.
Licensing
Licensed under US Patent 6,427,009.
Hearing Aid Compatibility (HAC)
This telephone system meets FCC/Industry Canada standards for Hearing Aid Compatibility.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body. This transmitter must not be co-located or
Your new GE telephone system is EXPANDABLE
operated in conjunction with any other antenna or transmitter."
up to a total of 4 handsets (by purchase of optional
For body worn operation, this phone has been tested and meets the FCC RF exposure
guidelines when used with the belt clip supplied with this product. Use of other accessories
Model 28110 handset with charge cradle)
may not ensure compliance with FCC RF exposure guidelines.
Important Information
CAUTION:
RISK OF ELECTRIC SHOCK
NOTICE: This product meets the applicable Industry Canada technical specifications.
DO NOT OPEN
Operation is subject to the following two conditions: (1) This device may not cause interference,
THE LIGHTNING
CAUTION: TO REDUCE THE
WARNING: TO
FLASH AND ARROW
RISK OF ELECTRIC SHOCK, DO
and (2) This device must accept any interference, including interference that may cause
HEAD WITHIN THE
NOT REMOVE COVER (OR
PREVENT FIRE OR
TRIANGLE IS A
BACK). NO USER
undesired operation of the device.
ELECTRICAL SHOCK
WARNING SIGN
SERVICEABLE PARTS INSIDE.
ALERTING YOU OF
REFER SERVICING TO
The equipment must be installed using an acceptable method of connection. The customer
HAZARD, DO NOT
QUALIFIED SERVICE
"DANGEROUS
VOLTAGE" INSIDE
PERSONNEL.
should be aware that compliance with the above conditions may not prevent degradation of
EXPOSE THIS
THE PRODUCT.
PRODUCT TO RAIN
service in some situations.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
OR MOISTURE.
Repairs to certified equipment should be made by an authorized Canadian maintenance
Introduction
facility designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications company cause to
CAUTION: When using telephone equipment, there are basic safety
request the user to disconnect the equipment.
instructions that should always be followed. Refer to the IMPORTANT
Users should ensure for their own protection that the electrical ground connections of
SAFETY INSTRUCTIONS provided with this product and save them for
the power utility, telephone lines and internal metallic water pipe systems, if present, are
future reference.
connected together. This precaution may be particularly important in rural areas.
IMPORTANT: Because cordless phones operate on electricity, you should
CAUTION: Users should not attempt to make such connections themselves, but should contact
have at least one phone in your home that isn't cordless, in case the
the appropriate electric inspection authority, or electrician, as appropriate.
power in your home goes out.
NOTES: This equipment may not be used on coin service provided by the telephone company.
Before You Begin
Interference Information
Parts Checklist
(for 28111xx1 model)
This equipment generates and uses radio frequency energy which may interfere with
Make sure your package includes the items shown here.
residential radio and television reception if not properly installed and used in accordance
with instructions contained in this manual. Reasonable protection against such interference
is ensured, although there is no guarantee this will not occur in a given installation. If
interference is suspected and verified by switching this equipment on and off, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient the radio/television receiver's antenna, relocate the equipment with respect to the
do not
page
disturb
receiver, plug the equipment and receiver into separate circuit outlets. The user may also wish
charge/in use
Wall mount
Telephone
to consult a qualified radio/television technician for additional suggestions. This equipment
Base
bracket
line cord
has been fully tested and complies with all limits for Class B computing devices pursuant to
part 15 FCC Rules and Regulations.
Thomson Digital Technologies Ltd.
Model 28111
AC power
Battery compartment
Belt
Handset
© 2006 Thomson Digital Technologies Ltd.
00015921 (Rev. 2 CAN E)
adaptor
cover
clip
battery pack
Trademark(s) ® Registered
06-46
Marque(s) ® déposée(s
)
Printed in China
For Model 28111xx2 there will be ONE additional handset, charge cradle, belt clip, battery
Base Layout
pack and cover than shown above.
For Model 28111xx3 there will be TWO additional handsets, charge cradles, belt clips, battery
packs and covers than shown above.
charge/in use
For Model 28111xx4 there will be THREE additional handsets, charge cradles, belt clips, battery
(indicator)
packs and covers than shown above.
Telephone Jack Requirements
Wall plate
To use this phone, you need an RJ11C type modular telephone jack,
which might look like the one pictured here, installed in your home.
Modular
If you don't have a modular jack, call your local phone company to
telephone
find out how to get one installed.
charge/in use
line jack
Installation
Installing the Phone
Digital Security System
Installing the Handset Battery
Your cordless phone uses a digital security system to protect against false ringing,
NOTE: You must connect the handset battery before use.
unauthorized access, and charges to your phone line.
CAUTION: To reduce the risk of fire or personal injury, use only the
INSTALLATION NOTE: Some cordless telephones operate at frequencies
Thomson Inc. approved Nickel-metal Hydride (Ni-MH) battery model
that may cause or receive interference with nearby TVs, microwave
5-2721, that is compatible with this unit.
ovens, and VCRs. To minimize or prevent such interference, the base
of the cordless telephone should not be placed near or on top of a TV,
1. Locate battery and battery door which are packaged together inside a plastic bag and are
microwave ovens, or VCR. If such interference continues, move the
separate from the handset.
cordless telephone farther away from these appliances.
2. Locate the battery compartment on the back of the handset.
Certain other communications devices may also use the 1.9GHz DECT
3. Plug the battery pack cord into the jack inside the compartment.
frequency for communication, and, if not properly set, these devices
NOTE: To ensure proper battery installation, the connector is keyed and
may interfere with each other and/or your new telephone. If you are
can be inserted only one way.
concerned with interference, please refer to the owner's manual for these
devices on how to properly set channels to avoid interference. Typical
devices that may use the 1.9GHz DECT frequency for communication
include wireless audio/video senders, wireless computer networks, multi-
handset cordless telephone systems, and some long-range cordless
telephone systems.
Important Installation Guidelines
PRESS DOWN
• Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave ovens,
FIRMLY
heating appliances and direct sunlight.
4. Insert the battery pack.
• Avoid areas of excessive dust, moisture and low temperature.
5. Close the battery compartment by pushing the door up until it snaps into place.
• Avoid other cordless telephones or personal computers.
Base Station
• Never install telephone wiring during a lightning storm.
1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your
• Never install telephone jacks in wet locations unless the jack is specifically designed for
cordless telephone on a level surface, such as a desktop or tabletop, or you may mount it
wet locations.
on the wall.
THE EXCLAMATION
• Never touch non-insulated telephone wires or terminals, unless the telephone line has
POINT WITHIN THE
2. Plug one end of the telephone line cord into the TEL LINE jack on the back of the base and
TRIANGLE IS A
been disconnected at the network interface.
WARNING SIGN
the other end into a modular jack.
ALERTING YOU OF
• Use caution when installing or modifying telephone lines.
IMPORTANT
INSTRUCTIONS
Handset Layout
ACCOMPANYING
THE PRODUCT.
Visual Message Waiting
Indicator (VMWI)
display
TALK/CALL BACK
(button)
caller ID-volume
caller ID-volume up
down (button)
(button)
DECT
3. Plug the AC power adaptor into the electrical outlet and the DC connector into the jack on
conf/format
SPEAKER
the back of the base.
(conference/format
(button)
4. Place the handset in the base cradle. The charge/in use indicator turns on, verifying the
button)
battery is charging.
delete
redial
TALK
5. Allow the phone to charge for 16 hours prior to first use. If you don't properly charge the
CALL
(button)
(button)
format
BACK
delete
phone, battery performance is compromised.
conf
CAUTION: Use only the Thomson Inc. 5-2715 power adaptor that came
SPEAKER
redial
program
with this unit. Using other power adaptors may damage the unit.
mute
int
This power adaptor is intended to be correctly orientated in a vertical
DECT
int
1
3
mute/program
or floor mount position.
2
DEC
(intercom button)
ABC
(button)
Wall Mounting
TALK
CALL
conf
format
BACK
delete
4
6
redial
SPEAKER
program
GHI
5
MNO
int
mute
JKL
1. Turn the base over.
1
3
*TONE/exit
2
ABC
DEC
#pause/ringer
4
GHI
5
6
MNO
7
9
7
JKL
9
(button)
PO
8
WX
exit
RS
PO
8
TUV
WX
YZ
RS
YZ
(button)
2. Attach the wall mounting pedestal by first inserting the tabs on the open edge of the
0
OP
#
TUV
memory
ER
flash
exit
pedestal into the slots on the lower portion of the bottom of the base. Then push down and
#
0
OP
snap the pedestal into place.
ER
Handset
memory
flash
3. Slip the mounting holes (on the back of the base) over the wall plate posts, and slide the unit
flash
memory
down into place. (Wall plate not included.)
(button)
NOTE : If desired, gather the extra telephone line and power adaptor cord
(button)
and store inside the wall mounting bracket.
Programming the Telephone
Ringer Tone
You may choose from ten different ringer tones and ten different melodies.
Standby Screen
From the Handset Setup Menu:
The handset displays the handset number and user name.
1. Press the caller ID-volume ( 6 or 5) button to scroll to the RINGER TONE sub-menu.
page (button)
2. Press mute/program button to enter the menu. SET RINGER TONE 01 shows in the display.
The default setting is 01.
USER NAME
3. Use the caller ID-volume ( 6 or 5) button to scroll to the desired setting (1 through 20). You
do not
HANDSET X
will hear a sample of the ringer tone/melody you select.
disturb
(button)
4. Press the mute/program button to save your selection. You will hear a confirmation tone
Programming Functions
do not
and the selected ringer tone shows in the display.
page
disturb
The system uses a menu structure to give you access to all of the built-in features. You may
NOTE: You must have the Ringer Volume set to ON for ring tone to signal
program the following items in main menu: Room Monitor and Handset Setup.
an incoming call.
Room Monitor
(applicable only with additional handsets)
Ringer Volume
From the Handset Setup Menu:
1. Make sure your phone is OFF (not in talk mode).
1. Press the caller ID-volume ( 6 or 5) button to scroll to the RINGER VOLUME sub-menu.
2. Press the mute/program button to go to the main menu.
2. Press mute/program button to enter the menu. SET RINGER 41HI 2LO 3OFF shows in the
3. Press caller ID-volume ( 6 or 5) button to scroll to ROOM MONITOR.
display. The default setting is HI.
4. Press mute/program button to enter ROOM MONITOR menu, ROOM MONITOR EXTENSION?
3. Use the touch tone pad on the handset to select 1, 2 or 3, or use the caller ID-volume
shows in the display.
( 6 or 5) button to scroll to your selection.
4. Press the mute/program button to save your selection. You will hear a confirmation tone and
> ROOM MONITOR
EXTENSION?
the new volume setting shows in the display.
NOTE: If you turn the ringer OFF, the ringer off icon shows in the display.
VIP Melody
This feature allows you to assign a specific melody to someone you want to get your attention
5. Use the touch tone pad to enter the handset name/number to be monitored.
when the person calls. When a VIP melody is assigned and that person calls, the unit rings the
NOTE: When this phone system is expanded (up to 4 handsets by
normal ring for the first ring and then follows with VIP melody ring. You may choose from ten
purchase of optional Model 28110 handset with recharge cradle),
different polyphonic melodies and may store up to 10 VIP records.
battery
handsets are named HANDSET 1, HANDSET 2, HANDSET 3 and HANDSET
NOTE: This feature ONLY works when the following conditions are met.
pack
4 respectively.
1. You have subscribed to Caller ID.
black wire
6. The receiving handset will turn on the microphone and the originating handset will turn on
2. You have your Caller ID record previously transferred to the memory.
the speakerphone to monitor sound from the receiving handset.
(Refer to Storing CID Records in Internal Memory). NO USER memory will
NOTE: For room monitoring mode to work, the originating handset must
show in the display to remind the user to do CID record transfer first.
NOT be on the cradle.
Storing VIP Melody
red wire
NOTE: While in room monitoring mode, the handsets will emit an alert
From the Handset Setup Menu:
tone approximately every 5 seconds if there is an incoming call. You may
1. Press the caller ID-volume ( 6 or 5) button to scroll to VIP MELODY sub-menu.
press the SPEAKER button to quit room monitor and answer the call.
2. Press mute/program button to select VIP MELODY feature and then display VIP 1 record.
NOTE: While in room monitoring mode, the originating handset can
- If VIP1 does NOT contain any specific number/records, it will display **EMPTY**.
be switched to monitor by handset earpiece by pressing the TALK/
CALL BACK button once. Switch back to speakerphone by pressing the
3. Press caller ID-volume ( 6 or 5) button to select the specific VIP melody memory location
SPEAKER button once.
(10 VIP locations) that does not contain any record.
NOTE: Press the *TONE/exit button on the handset to exit room monitor mode.
4. Press mute/program button to display SELECT MEMORY.
Handset Setup
NOTE: If the memory location does not contain any CID memory records
and you are trying to mark a specific record as VIP MELODY, then SELECT
1. Make sure your phone is OFF (not in talk mode).
MEMORY will not be displayed. Instead, NO USER MEMORY will display in
2. Press the mute/program button to go to the main menu.
prompt to alert the user.
3. Press caller ID-volume ( 6 or 5) button to scroll to HANDSET SETUP.
5. Press caller ID-volume ( 6 or 5) button to view the records from memory to be selected as VIP.
4. Press mute/program button to confirm and you may program the following items: Language,
6. Press mute/program button to confirm and then display VIP MELODY 01 to wait for the
Handset Name, Ringer Tone, Ringer Volume, VIP Melody, Key Tone, Area Code, Tone/Pulse,
melody tone selection.
Registration, Deregistration and Default Setting.
7. Press caller ID-volume ( 6 or 5) button to select from melody 01 to melody 10
NOTE: During programming, you may press the *TONE/exit button at any
(a testing tone is generated while making melody selection)
time to exit the sub-menu and return to the menu.
8. Press mute/program button to confirm.
Language
NOTE: If the desired number/record was previously stored in any one of
From the Handset Setup Menu:
the ten VIP melody records, DUPLICATE NUMBER shows in the display.
1. Press the caller ID-volume ( 6 or 5) button to scroll to the SET LANGUAGE sub-menu.
Changing a Stored VIP Melody Record
2. Press mute/program button to enter the menu. SET LANGUAGE 41ENG 2FRA 3ESP shows
in the display. The default setting is 1ENG.
Use the Storing VIP Melody procedure to change the number of a selected record and replace
the old phone number with new phone number.
3. Use the touch tone pad on the handset to select 1ENG, 2FRA, 3ESP, or use the caller ID-
volume ( 6 or 5) button to scroll to the desired language.
When REPLACE VIP# ? shows in the display, you must press mute/program button on the
4. Press the mute/program button to save your selection. You will hear a confirmation tone
handset to confirm replacement.
and the selected language shows in the display.
Reviewing And Deleting Stored VIP Melody Record
Handset Name
1. Press the caller ID-volume ( 6 or 5) button to scroll to VIP MELODY sub-menu.
From the Handset Setup Menu:
2. Press mute/program button to select VIP MELODY feature and then display VIP 1 record.
1. Press the caller ID-volume ( 6 or 5) button to scroll to the HANDSET NAME sub-menu.
3. Use the caller ID-volume ( 6 or 5) button to scroll to the desired VIP Melody Record.
2. Press mute/program button to enter the menu. HANDSET NAME shows in the display. The
default setting is HANDSET #.
4. If you want to delete the information, press the delete button on the handset while the entry
displays. The display shows DELETE VIP# ?.
3. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of
5. Press delete again to confirm. You will hear a confirmation tone and VIP# DELETED shows
the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3
in the display.
times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the second letter
Key Tone
L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the
From the Handset Setup Menu:
letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the
1. Press the caller ID-volume ( 6 or 5) button to scroll to the KEY TONE sub-menu.
letter T; press the 4 key twice for the letter H.
2. Press mute/program button to enter the menu. SET KEY TONE 41ON 2 OFF shows in the
NOTE: If you make a mistake, use the delete button to backspace and
delete one character at a time.
display. The default setting is 1ON.
3. Use the touch tone pad on the handset to select 1 or 2, or use the caller ID-volume
4. Press the mute/program button to save your name. You will hear a confirmation tone and
the handset name shows in the display.
( 6 or 5) button to scroll to your selection.
4. Press the mute/program button to confirm and the key tone setting shows in
4. Release the Page button.
the display.
5. Press and release the page button on the base once. All handsets are de-registered and
Area Code
HANDSET NEEDS REGISTRATION shows in the display.
From the Handset Setup Menu:
Default Setting
1. Press the caller ID-volume ( 6 or 5) button to scroll to the AREA CODE sub-menu.
As you become familiar with this system, you may prefer to use the system's original settings.
2. Press mute/program button to enter the menu. SET AREA CODE - - - shows in the display.
Follow the steps below to return to the factory default settings.
The default setting is - - -.
From the Handset Setup Menu:
1. Press the caller ID-volume ( 6 or 5) button to scroll to the DEFAULT SETTING sub-menu.
3. Use the touch-tone pad to enter your 3-digit area code.
2. Press the mute/program button to enter the menu. DEFAULT SETTING 1YES 2NO shows in
4. Press the mute/program button to confirm. You will hear a confirmation tone and the new
the display. The default setting is 2NO.
area code shows in the display.
3. Use the touch-tone pad to select 1YES or 2NO, or use the caller ID-volume ( 6 or 5) button
NOTE: To restore the default setting to - - -, press and release delete
to move the cursor to 1YES or 2NO.
when SET AREA CODE shows in the display.
NOTE: If you choose YES all the settings in the programmable menu are
Tone/Pulse
returned to factory default setting.
From the Handset Setup Menu:
4. Press the mute/program button to save your selection. You will hear a confirmation tone.
1. Press the caller ID-volume ( 5 or 6) button to scroll to the TONE PULSE sub-menu.
Telephone Operation
2. Press mute/program button to enter the menu. TONE/PULSE 41TONE 2PULSE shows in
the display. The default setting is "1 TONE".
Visual Indicators
3. Use the touch-tone pad or caller ID-volume ( 5 or 6) to enter 1 TONE or 2 PULSE.
Charge/In Use Indicator on Base
4. Press the mute/program button to confirm. You will hear a confirmation tone and your
The charge/in use indicator on the base will flash to alert you to an incoming call, during
selection shows in the display.
paging, or if you have a message waiting from your service provider. The indicator will remain
Registration
lit when a handset is in the base charging or when the line is in use.
Your packaged handset(s) are pre-registered and ready to use. It is not recommended that
TALK/CALL BACK Indicator on Handset
a handset be registered again unless absolutely necessary.
The TALK/CALL BACK and SPEAKER indicator buttons flash when you receive a call and
From the Handset Setup Menu:
remain lit during a call.
1. Press the caller ID-volume ( 6 or 5) button to scroll to the REGISTRATION sub-menu.
VMWI Indicator on Handset
2. Press the mute/program button to enter the menu. REGISTRATION 1YES 42NO - - -shows
IMPORTANT: In order to use this unit's Visual Message Waiting Indicator
in the display. The default setting is 2NO.
(VMWI) feature, you must subscribe to this service from your phone company.
3. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the caller ID-volume ( 6 or
The VMWI indicator on the top of the handset flashes when you receive a new message from
5) button to scroll to 1YES or 2NO.
your service provider.
4. If you select YES, press the mute/program button. HOLD BASE PAGE FOR 5 SECONDS, THEN
Speakerphone Operation
PRESS HANDSET PROGRAM shows in the display. (Your handset should be held near the
.
base during registration process.)
NOTE: If you are using the speakerphone, remain close to handset so the
5. Press and hold the page button on the base unit until the charge/in use indicator flashes.
party you are speaking to can hear you.
Press the handset mute/program button. REGISTERING shows in the display. HANDSET X
If you are using the handset and want to switch to the speakerphone, press the SPEAKER
REGISTERED shows in the handset display, where X is the handset number. You may now
button, press SPEAKER again to end conversation.
rename your handset. (Refer to Step 3 & 4 of Handset Name Section)
If you are using the speakerphone and want to switch to the handset, press the TALK/
NOTE: IF you are re-registering the handset through the handset menu;
CALL BACK button, press TALK/CALL BACK again to end conversation.
to rename your handset you must go to the Handset Name Section and
Making a Call
start from the beginning step.
De-Registration
1. Press the TALK/CALL BACK or SPEAKER button. Dial the desired number.
De-registration cancels registration. During the de-registration process, keep the handset
- OR -
near the base.
Dial the number first, then press the TALK/CALL BACK or SPEAKER button.
From the Handset Setup Menu:
- OR -
1. Press the caller ID-volume ( 6 or 5) button to scroll to the DEREGISTRATION sub-menu.
Press the caller ID-volume ( 6 or 5) button to select the desired record, then press the
2. Press the mute/program button to enter the menu. DEREGISTRATION 1YES 42NO - - -
TALK/CALL BACK or SPEAKER button.
shows in the display The default setting is 2NO.
2. When finished, press the TALK/CALL BACK or SPEAKER button to hang up.
3. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the caller ID-volume
NOTE: You may enter up to 32 pre-dial digits.
( 6 or 5) button to scroll to 1YES or 2NO.
NOTE: If you want to delete the pre-dial number you entered, press the
WARNING: It is not recommended that a handset be de-registered unless
delete button until all of the digits are erased.
absolutely necessary because once a handset is de-registered, that handset's
Answering Calls
telephone features cannot be used until the handset is re-registered.
4. Select NO, if you do not want to de-register.
1. When the phone rings, press the SPEAKER button on the handset,
5. If you select YES, press the mute/program button and MOVE NEAR TO BASE displays for 2
- OR -
seconds, then CONFIRM? 1YES 2NO appears in the display.
Pick up the handset and press the TALK/CALL BACK button.
6. Press the touch-tone pad to select 1 for YES or 2 for NO, or use the caller ID-volume ( 6 or
2. When finished, press SPEAKER or TALK/CALL BACK to hang up.
5) button to scroll to 1YES or 2NO.
NOTE: Adjust the handset volume by pressing the caller ID-volume
7. If you select YES, press the mute/program button to confirm. DE-REGISTER... shows in the
( 6 or 5) button during a call.
display. You will hear a confirmation tone. Then HANDSET X DEREGISTERED shows in the
display to confirm the handset is deregistered.
Call Timer
NOTE: When you complete the de-registration process, HANDSET
After you press the TALK/CALL BACK button on the handset, the built-in call timer shows on the
NEEDS REGISTRATION shows in the display. To use the handset,
display and counts the length of time of the call in minutes and seconds.
you MUST re-register the handset using the Registration process.
Auto Standby
Global De-registration
If you place the handset in the cradle while the handset is off the hook (during a call), the call is
If one or more handsets becomes lost, you should de-register all handsets to ensure proper
automatically disconnected.
system operation. Follow the steps below to de-register all handsets at the same time.
Ringer HI/LO/OFF (Shortcut)
WARNING: It is not recommended that a handset be de-registered unless
absolutely necessary because once a handset is de-registered, that handset's
There are two ways to set the ringer to HI/LO/OFF. One is the traditional way as described in
telephone features cannot be used until the handset is re-registered.
the Programming Functions; Handset Setup; Ringer Volume menus. The other one is this short
1. 1.
Disconnect power from the base by pulling the plug out of the back of the unit.
cut to ringer menu.
2. Press and hold the Page button and while holding the Page button reconnect the power.
1. Make sure the phone is OFF (not in talk mode).
3. Continue to hold the Page button until the charge/in use light flashes rapidly.
2. Press the #pause/ringer button to display SET RINGER 1HI 2LO 3OFF.
3. Use the touch tone pad on the handset to select 1, 2 or 3, or use the caller ID-volume
( 6 or 5) button to scroll to your selection. HI is the default setting.
4. Press #pause/ringer button again to save and display the new selection for a few seconds.
Flash/Call Waiting
If you subscribe to the combined Call Waiting Caller ID service from your local telephone
company, you will receive Caller ID information (if available) on Call Waiting calls. During a phone
call, you will hear a beep to indicate another call is waiting on the line and Caller ID information
for the waiting call shows on the handset display.
• To connect to the waiting call, press the flash button on the handset, and your original call
is put on hold.
• To switch between the two calls, press the flash button.
TIP: Do not press the TALK/CALL BACK button on the handset to activate a
custom calling service, such as call waiting, or call will disconnect.
Last Number Redial
You may redial a number up to 32 digits long. To quickly redial the last number you dialed:
1. Press the TALK/CALL BACK button.
2. Press the redial button.
-OR-
3. Press the redial button first, then use the caller ID-volume ( 6 or 5) button to select the
desired redial number.
- Press the caller ID-volume ( 5) to review the oldest call and scroll toward the most recent
calls (higher numbers).
- Press the caller ID-volume ( 6 ) to review the newest call and scroll to older calls (lower
numbers).
NOTE: You may choose from three last dialed numbers.
4. Press the TALK/CALL BACK button. The number dials automatically.
If you get a busy signal and want to keep dialing the number, press the redial button to quickly
redial the number.
Exit
Press the *TONE/exit button to exit a menu function and return to the standby screen.
Page
The page feature helps you locate a misplaced handset. To send and receive pages, all
handsets must be registered. If your handset is not registered, follow the instructions in the
Registration section of this manual.
Handset Paging
(applicable only with additional handsets)
1. Make sure the phone is OFF (not in talk mode).
2. Press and release the int button on a handset. PAGING EXTENSION? shows in the display.
3. Use the touch-tone pad to enter the handset number you want to page. (1= to page
Handset 1, 2=to page handset 2, etc., and 5=to page all handsets)
4. To cancel the page, press the *TONE/exit, int, or TALK/CALL BACK button on the originating
handset, or press the *TONE/exit button on the receiving handset.
Base Paging
Use the base-only to page all registered handsets at the same time.
1. Press the page button on the base. All handsets beep for two minutes, and PAGING FROM
BASE shows on each handset's display.
2. To cancel the page, press the page button on the base, or press the TALK/CALL BACK button
or the *TONE/exit button on each handset.
Mute
To have a private, off-line conversation, use the MUTE feature. The party on the telephone line
cannot hear you, but you can hear them.
1. Press the mute/program button. The handset display shows MUTE ON.
2. Press the mute/program button to cancel and return to your phone conversation.
Receiver Volume Control
When the handset is ON (in talk mode) you may adjust the receiver volume by pressing the
caller ID-volume ( 6 or 5) button. There are four volume levels to choose from. When the
maximum or minimum volume level is reached, the phone beeps twice. VOL 1 is minimum and
VOL 4 is maximum.
Do Not Disturb (DND)
DND allows you to mute the ringer on all handsets.
In the standby mode, press the do not disturb button on the base. The DND indicator will light
and DO NOT DISTURB shows in handset display.
To cancel, press the do not disturb button again.

Advertisement

loading

Summary of Contents for GE 28111EE2

  • Page 1 NOTE: Press the *TONE/exit button on the handset to exit room monitor mode. 2. Plug one end of the telephone line cord into the TEL LINE jack on the back of the base and Handset Setup the other end into a modular jack.
  • Page 2: Intercom Operation

    1. Make sure the phone is OFF (not in TALK mode). Advanced Intercom Features receive an incoming call and you are using the GE multi handset system, a beep indicates the presence of a Call Waiting call on the line. The Call Waiting Caller ID information will be 2.

This manual is also suitable for:

28111 series