Do Not Disturb (D-N; Intercom Operation; Making An Auto Intercom Call - GE 28223EE1 User Manual

Do Not Disturb (D-N-D)
This feature allows you to turn off all the handset ringer(s) at once, by
pressing one button at the base unit, even though the ringer volume
of handset(s) has been preset.
1. In the standby mode, press the do not disturb button on the
base.
. The DND indicator illuminates and the handset screen displays .
. To cancel, press the do not disturb button again.
NOTE: You can press the do not disturb button and activate
the function immediately, even when there is incoming call
ringing in, or during call screening after the call is taken by
the answerer.

Intercom Operation

(applicable only with additional handsets)
The intercom feature allows you to have a conversation with another
registered handset without tying up the telephone line, allowing you
to still receive incoming calls.

Making an Auto Intercom Call

1. Make sure the handset is OFF (not in TALK mode).
. Press the delete/int/conf button on the handset.
. Use the touch-tone pad to select the handset you want to page.
NOTES:
a) If the user has not entered the paged handset number
within a few seconds, the handset displays a paged
handset number list (i.e. Handset 2, Handset 3, Handset
4, Handset 5 and Handset 6) if Handset 1 is paging the
handset.
6