Table of Contents
Advertisement
Making a Call
1. Pick up the handset, and press the TALK/CALL BACK or SPEAKER button. Wait for a
dial tone, then dial the desired number.
-OR-
Dial the number and then press the TALK/CALL BACK or SPEAKER button.
. When finished, press the TALK/CALL BACK or SPEAKER button or place the handset
in the base cradle to hang up.
Answering a Call
Check the display to see who is calling.
NOTE: You can only use one handset at a time. UNAVAILABLE will be
displayed if other handset is in use.
1. Pick up the handset, and press the TALK/CALL BACK or SPEAKER button on the
handset.
. When finished, press the TALK/CALL BACK or SPEAKER button or place the handset
in the base cradle to hang up.
Volume
When the handset is ON (in talk mode), you may adjust the receiver volume by
pressing the 6 or 5 button. There are four volume levels to choose from. When
the maximum or minimum volume level is reached, the phone beeps twice. VOL 1 is
minimum and VOL 4 is maximum.
Call Timer
After you press TALK/CALL BACK or SPEAKER button on the handset, the built-in call
timer shows in the display and begins counting the length of time of the call.
Auto Standby
Placing the cordless handset in the charge cradle while the handset is off the hook (or
during a call) automatically hangs up the handset.
Flash/Call Waiting
If you subscribe to the combined Call Waiting Caller ID service from your local
telephone company, you will receive Caller ID information (if available) on Call Waiting
calls. During a phone call, you will hear a beep to indicate another call is waiting on the
line and Caller ID information for the waiting call shows on the handset display.
30
Advertisement
Table of Contents
