LG CodeZero A9 Series Service Manual page 45

Failures and measures
The compression lever cannot be lifted up to the end.
1. Remove the large dust separator from the cleaner.
[Rotate it counterclockwise
as shown in the figure.]
2. With the dust compression lever pulled down, clean the inside of the dust bin using the cleaning brush accessory provided.
[Pull the dust compression
lever down.]
3. After cleaning, throw dust away in the trash bin.
When throwing it away in the trash bin, operate the dust compression lever two or three times.
※ You can remove it more easily using the gap inlet port provided as an accessory.
[When you pull it down after
rotating it, the large dust
separator will be removed.]
[Remove dust caught in the gap using the cleaning brush.]
※ It is recommended to remove any dust in the cracks at the top
and the compression unit thoroughly as shown in the figure.
-45-
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes